PUBLIC PRODUCTIONEVALUATION ONLY · NOT AUTHORITATIVERelease scope
Open the Builder

METRAXIOM

Choose your language

Translation drafts · not independently reviewed Display only. Canonical values, significant digits, calculations, decisions, provenance and record fingerprints do not change.

MEASUREMENT INTELLIGENCE

Measurement decisions, supported by evidence.

Build the worksheet. Inspect the decision. Understand what changes when a reference is corrected.

Build a calibration worksheetInspect a sample record

Public work remains uncontrolled

RECONSTRUCTABLE DECISION RECORD
SAMPLE MEASUREMENT RECORD · NOT ISSUEDPT-10420–100 psi
Error+0.074psi
REVIEW
Guarded acceptance
±0.070 psi
Stated tolerance
±0.100 psi
Expanded uncertainty
0.026 psi
SELECT A POINT TO INSPECT
WHY POINT 4 IS REVIEW

Error +0.074 psi is inside stated ±0.100 psi tolerance but outside the configured ±0.070 psi guarded acceptance interval.

Same sample record · no recalculation or authority change

START WITH A TASK

Three ways to explore the system.

Deterministic proof available

01Public tool

Build a calibration worksheet

Keep calculation, uncertainty, requirement, decision rule, and result inspectable.

Calibration StudioOpen the Builder
02Synthetic demonstration

Inspect why a result needs review

Sources, uncertainty, rule versions, replay state, exceptions, and contrary evidence stay inspectable.

Decision X-RayInspect the decision
03Synthetic demonstration

Explore a reference correction

Reference invalidation, recalls, blocked release, due work, and consequence can share one controlled evidence model.

AFTERSHOCKExplore the consequences

THE DECISION SPINE

A result. Its foundation. A traceable decision.

Identity, source, model, decision, evidence, and authority stay separate enough to inspect—and connected enough to reconstruct.

  1. 01

    Identity

    Which physical asset and measurement system?

  2. 02

    Source

    Which method, specification, standard, and evidence?

  3. 03

    Model

    Which corrections, uncertainty, units, and software semantics?

  4. 04

    Decision

    Which requirement, acceptance interval, and decision rule?

  5. 05

    Evidence

    Which observations, revisions, timestamps, and retained dependencies?

  6. 06

    Authority

    Who reviewed, released, or refused—and under what scope?

No authority created by interface state

Architecture

RECONSTRUCT + PROPAGATE CONSEQUENCE

Make the blast radius computable.

A changed reference does not necessarily change every connected decision.

Run AFTERSHOCK

Synthetic demonstration

842

SYNTHETIC INCIDENT

Excluded by scope/materiality
442
INVARIANT
218
Potential decision change
46
DIVERGENCE
117
INDETERMINATE
19
No product, batch, flight, recall, accreditation, regulator, or customer disposition is made by this public analysis.
Incident scope and limitations

Flight Recorder preserves the historical decision state. AFTERSHOCK interrogates a bounded incident against declared material dependencies and the complete supported correction interval—then separates invariant decisions, potential change, deterministic divergence, and cases where the evidence is insufficient.

SYNTHETIC INCIDENT · RS-00481 · DCV · 10 V

Supported correction envelope: +300 µV to +420 µV. No onset inside the interval is invented.

THE SAME EVIDENCE PRINCIPLE. ANOTHER FIELD.

Economic Observatory

Inspect public-company research with the same discipline: visible sources, explicit definitions, bounded assumptions and honest missingness. Financial scenarios remain separate from measurement authority.

Retained research · no automatic refreshEconomic Observatory

PUBLIC TOOLS

Supporting tools

Open Calibration Studio
Public tool

Calibration Label Studio

Create a printable label.

Public tool

Connection Atlas

Explore connection diagrams.

Public tool

Fleet import

Inspect an instrument inventory.

Public tool

Metrology Workstation

Work with reference tools.

Public tool

Context Twin

External context is context-only unless a controlled policy explicitly permits more.

Open live Context TwinPublic tool

ECHO

Review original source files.

TRUST + METRAXIOM DUEPROOF

Evidence before assurance language.

Trust, validation status, architecture, public proof, and explicit non-claims remain visible without a sales call.

CURRENT NON-CLAIMS
  • No authority created by interface state.
  • External context is context-only unless a controlled policy explicitly permits more. Context Twin
  • Calibration Studio, Decision X-Ray, AFTERSHOCK, deterministic Proof, and the sample record remain the public evaluation path. Pricing and enrollment state never create technical authority.
  • No software-only claim of accreditation, regulator approval, universal device support, DCC conformance, independent security certification, customer certificate authority, or air-gapped availability is created by this interface.
Trust CenterValidation StatusMeasurement MethodologyReview pricing and availability

FIRST-PARTY AGGREGATE TRAFFIC

Automatic counts. No individual tracking.

TRACE counts approved public page requests worldwide without an analytics consent banner. No visitor identifiers, fingerprints, individual browsing histories or GPS locations are collected.

GPC, DNT and traffic objections stop collection. Exclude my traffic · How counting works · Privacy notice.

Analytics privacy update · October 29, 2026

TRACE automatically measures aggregate requests to approved public METRAXIOM pages worldwide to improve content, navigation and reliability. It runs at the first-party hosting proxy, before the hosting page cache, and works when JavaScript is disabled. No analytics consent banner or country-based opt-in selection is used.

The basic store contains separate hourly totals for approved pages, country and US-state labels, common referral domains, broad device/browser/operating-system families and unverified request categories. It contains no individual request ledger, full IP addresses, raw user agents, full URLs or queries, visitor identifiers, fingerprints, session histories or GPS coordinates. Country labels come from hosting network metadata and can describe a VPN or network exit. Missing geography is recorded as unavailable. No city, address or coordinates are collected. US-state labels come only from the trusted hosting header; other state/region labels remain unavailable. Software names are broad, spoofable claims, with no versions or cross-request fingerprint.

GPC, DNT and an explicit traffic objection stop collection. Earlier “Keep analytics off” choices saved only in browser storage are carried forward as objections when JavaScript runs on a public application page. They are not sent with the initial HTTP request: that request, JavaScript-disabled requests and static-only visits may contribute until an objection cookie or privacy signal is sent. Exclude this browser from traffic measurement without an account or JavaScript. The preference cookie uses the same value for everyone who excludes traffic (1) or explicitly restores basic measurement (0), lasts up to 180 days and does not identify you. Restoring basic measurement preserves the old local choice; it can apply again after the restore preference expires or is cleared. Restoring aggregate measurement does not override privacy signals or grant individual tracking permission. Earlier aggregate counts cannot be linked back to you or selectively removed.

When you choose a dashboard view, a separate functional reporting-preference cookie remembers only the preset or calendar dates for up to 30 days, scoped to /traffic. It is not used by the collection layer and contains no identifier or consent grant. Use Forget saved reporting view, including without JavaScript, to remove it. A failed refresh may display a clearly dated snapshot held briefly in page memory; it is never relabeled as current or replaced with fabricated zero counts.

Individual browser analytics is disabled in this aggregate-only rollout. The former optional browser collector is not loaded, its intake is retired, and no new tab/session events are accepted. Earlier consent records are not rewritten as new permission. Previously collected optional events follow their existing 30-day retention and integrity-checkpoint policy.

Page requests are separate from verified page rendering or unique people. Navigation requests, crawler claims, link previews, other automation and unknown requests remain separate. Estimated visitors and session histories are unavailable. Small labeled groups are combined in public reports. Counts are aggregate observations and do not establish identity, intent or endorsement.

Recognized health checks, HEAD requests, prefetches, server-component fetches and private/API/unapproved paths are excluded. Browser memory/disk cache, back-forward restores, client-only navigation, privacy objections, missing metadata and storage failures leave coverage gaps. Request retries and spoofed software labels can affect totals. The system does not extrapolate missed traffic or import historical Vercel Analytics counts.

Hourly counter buckets are retained for 30 days and pruned hourly in bounded runs; calendar reports exclude older hourly data even if maintenance is delayed. Separate cumulative marginal totals, with no event times or cross-dimension links, remain for the life of the site’s traffic record. Changing a date range, leaving the page or closing a browser does not erase those totals. Earlier uncollected state/software labels remain unavailable, not reconstructed. Vercel delivers the website and Supabase stores TRACE aggregates in the existing United States database. Provider security logs and backups have separate policies. TRACE adds no paid analytics feed or operator-computer dependency.

This October 29, 2026 supplement updates the analytics description in the September 7, 2026 Privacy Notice. It does not amend frozen agreement snapshots or claim that server-side processing is automatically exempt from privacy law. The assessment concerns this limited data flow and its controls; no universal regulatory approval is claimed. Privacy requests: ANDREWATTS23@gmail.com.

Measure with purpose. Decide with evidence.

Measurement-decision infrastructure connecting instrument identity, controlled authority, deterministic calculation, uncertainty, review, and reproducible proof.

METRAXIOM is the software product and brand. The individual seller is Andre Jason Watts. METRAXIOM DUEPROOF is the assurance architecture beneath evidence, dependency, correction, recall, and proof; it is not a separate calibration certificate, accreditation mark, or public product.

PlatformProductCalibration StudioFleet importMetrology WorkstationConnection AtlasCalibration Label StudioDevice BridgeOperationsIntegrations
EvaluationSolutionsArchitectureDocumentationMethodologyPricingContact
TrustTrust CenterSecurityAssuranceData GovernanceAI & Data UseSystem Status
Company & legalCompanySupportAccessibilityLegal CenterPrivacyTermsCancel subscriptionAccount deletionCustomer & business contact
© 2026 Andre Jason Watts · METRAXIOM. Contact:ANDREWATTS23@gmail.com.No accreditation, certification, regulator approval, universal device compatibility, or independent metrology-validation claim is created by purchasing or using the software.